 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FDP8880 / FDB8880 February 2005 FDP8880 / FDB8880 N-Channel PowerTrench(R) MOSFET 30V, 54A, 11.6m Features r DS(ON) = 14.5m, VGS = 4.5V, ID = 40A r DS(ON) = 11.6m, VGS = 10V, ID = 40A High performance trench technology for extremely low r DS(ON) Low gate charge High power and current handling capability General Description This N-Channel MOSFET has been designed specifically to improve the overall efficiency of DC/DC converters using either synchronous or conventional switching PWM controllers. It has been optimized for low gate charge, low r DS(ON) and fast switching speed. Applications DC/DC converters DRAIN (FLANGE) GATE DRAIN (FLANGE) SOURCE DRAIN GATE D SOURCE G TO-263AB FDB SERIES TO-220AB FDP SERIES S (c)2005 Fairchild Semiconductor Corporation FDP8880 / FDB8880 Rev. A 1 www.fairchildsemicom FDP8880 / FDB8880 MOSFET Maximum Ratings TC = 25C unless otherwise noted Symbol VDSS VGS Parameter Drain to Source Voltage Gate to Source Voltage Drain Current Continuous (TC = 25oC, VGS = 10V) ID Continuous (TC = 25 C, VGS = 4.5V) Continuous (Tamb = 25oC, VGS = 10V, with RJA = 43oC/W) Pulsed EAS PD TJ, TSTG Single Pulse Avalanche Energy (Note 1) Power dissipation Derate above 25oC Operating and Storage Temperature o Ratings 30 20 54 48 11 Figure 4 31 55 0.37 -55 to 175 Units V V A A A A mJ W W/oC o C Thermal Characteristics RJC RJA RJA Thermal Resistance Junction to Case TO-220,TO-263 Thermal Resistance Junction to Ambient TO-220,TO-262 ( Note 2) Thermal Resistance Junction to Ambient TO-263, 1in copper pad area 2 2.73 62 43 oC/W o o C/W C/W Package Marking and Ordering Information Device Marking FDP8880 FDB8880 FDP8880 FDB8880 Device FDP8880 FDB8880 FDP8880_NL (Note 3) FDB8880_NL (Note 3) Package TO-220AB TO-263AB TO-220AB TO-263AB Reel Size Tube 330mm Tube 330mm Tape Width N/A 24mm N/A 24mm Quantity 50 units 800 units 50 units 800 units Electrical Characteristics TC = 25C unless otherwise noted Symbol Parameter Test Conditions Min Typ Max Units Off Characteristics BVDSS IDSS IGSS Drain to Source Breakdown Voltage Zero Gate Voltage Drain Current Gate to Source Leakage Current ID = 250A, VGS = 0V V DS = 24V VGS = 0V VGS = 20V TC = 150oC 30 1 250 100 V A nA On Characteristics VGS(TH) Gate to Source Threshold Voltage VGS = VDS, ID = 250A ID = 40A, VGS = 10V rDS(ON) Drain to Source On Resistance ID = 40A, VGS = 4.5V ID = 40A, VGS = 10V, TJ = 175oC 1.2 0.012 0.015 2.5 0.0145 0.019 V 0.0095 0.0116 (c)2005 Fairchild Semiconductor Corporation FDP8880 / FDB8880 Rev. A 2 www.fairchildsemicom FDP8880 / FDB8880 Dynamic Characteristics CISS COSS CRSS RG Qg(TOT) Qg(5) Qg(TH) Qgs Qgs2 Qgd Input Capacitance Output Capacitance Reverse Transfer Capacitance Gate Resistance Total Gate Charge at 10V Total Gate Charge at 5V Threshold Gate Charge Gate to Source Gate Charge Gate Charge Threshold to Plateau Gate to Drain "Miller" Charge V DS = 15V, VGS = 0V, f = 1MHz VGS = 0.5V, f = 1MHz VGS = 0V to 10V VGS = 0V to 5V VGS = 0V to 1V VDD = 15V ID = 40A Ig = 1.0mA 1240 255 147 2.7 22 12 1.6 3.2 2.0 4.8 29 16 2.1 pF pF pF nC nC nC nC nC nC Switching Characteristics (VGS = 10V) tON td(ON) tr td(OFF) tf tOFF Turn-On Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-Off Time V DD = 15V, ID = 40A VGS = 10V, RGS = 13.6 8 107 47 51 171 147 ns ns ns ns ns ns Drain-Source Diode Characteristics VSD trr QRR Source to Drain Diode Voltage Reverse Recovery Time Reverse Recovered Charge ISD = 40A ISD = 3.5A ISD = 40A, dISD/dt = 100A/s ISD = 40A, dISD/dt = 100A/s 1.25 1.0 27 18 V V ns nC Notes: 1: Starting TJ = 25C, L = 34uH, IAS = 43A,Vdd = 27V, Vgs = 10V. 2: Pulse width = 100s. 3: FDP8880_NL / FDB8880_NL is lead free product. FDP8880_NL / FDB8880_NL marking will appear on the reel label. (c)2005 Fairchild Semiconductor Corporation FDP8880 / FDB8880 Rev. A 3 www.fairchildsemicom FDP8880 / FDB8880 Typical Characteristics TC = 25C unless otherwise noted 1.2 60 POWER DISSIPATION MULTIPLIER 1.0 ID, DRAIN CURRENT (A) 0 25 50 75 100 125 150 175 0.8 40 0.6 0.4 20 0.2 0 TC , CASE TEMPERATURE (o C) 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (oC) 175 Figure 1. Normalized Power Dissipation vs Case Temperature 2 1 DUTY CYCLE - DESCENDING ORDER 0.5 0.2 0.1 0.05 0.02 0.01 Figure 2. Maximum Continuous Drain Current vs Case Temperature ZJC, NORMALIZED THERMAL IMPEDANCE PDM 0.1 t1 t2 NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZJC x RJC + TC 10-3 10-2 t, RECTANGULAR PULSE DURATION (s) 10-1 100 101 SINGLE PULSE 0.01 10-5 10-4 Figure 3. Normalized Maximum Transient Thermal Impedance 600 TC = 25o C FOR TEMPERATURES TRANSCONDUCTANCE MAY LIMIT CURRENT IN THIS REGION ABOVE 25o C DERATE PEAK CURRENT AS FOLLOWS: I = I25 VGS = 10V VGS = 4.5V 175 - TC 150 IDM, PEAK CURRENT (A) 100 50 10-5 10-4 10-3 10-2 t, PULSE WIDTH (s) 10-1 100 101 Figure 4. Peak Current Capability (c)2005 Fairchild Semiconductor Corporation FDP8880 / FDB8880 Rev. A 4 www.fairchildsemicom FDP8880 / FDB8880 Typical Characteristics TC = 25C unless otherwise noted 400 10s IAS, AVALANCHE CURRENT (A) 100s 100 500 If R = 0 tAV = (L)(IAS)/(1.3*RATED BVDSS - VDD) If R 0 tAV = (L/R)ln[(IAS*R)/(1.3*RATED BVDSS - VDD) +1] 100 ID, DRAIN CURRENT (A) 10 1ms OPERATION IN THIS AREA MAY BE LIMITED BY rDS(ON) 1 SINGLE PULSE TJ = MAX RATED TC = 25oC 0.1 1 10 VDS, DRAIN TO SOURCE VOLTAGE (V) 40 STARTING TJ = 25o C 10 10ms STARTING TJ = 150oC 1 0.001 DC 0.01 0.1 1 tAV, TIME IN AVALANCHE (ms) 10 100 Figure 5. Forward Bias Safe Operating Area NOTE: Refer to Fairchild Application Notes AN7514 and AN7515 Figure 6. Unclamped Inductive Switching Capability 160 80 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VDD = 15V ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 60 VGS = 4.5V VGS = 3.5V 120 VGS = 10V VGS = 3V 80 TC = 25 oC PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VGS = 2.5V 40 TJ = 175oC 20 TJ = 25oC TJ = -55 oC 40 0 1.5 0 2.0 2.5 3.0 3.5 VGS, GATE TO SOURCE VOLTAGE (V) 4.0 0 0.25 0.5 0.75 1.0 VDS , DRAIN TO SOURCE VOLTAGE (V) Figure 7. Transfer Characteristics 20 NORMALIZED DRAIN TO SOURCE ON RESISTANCE ID = 54A rDS(ON), DRAIN TO SOURCE ON RESISTANCE (m) PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX Figure 8. Saturation Characteristics 1.7 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 1.53 16 1.36 1.19 12 ID = 5A 1.02 0.85 VGS = 10V, ID = 54A 0.7 -80 8 2 4 6 8 10 VGS, GATE TO SOURCE VOLTAGE (V) -40 0 40 80 120 160 TJ, JUNCTION TEMPERATURE (o C) 200 Figure 9. Drain to Source On Resistance vs Gate Voltage and Drain Current Figure 10. Normalized Drain to Source On Resistance vs Junction Temperature (c)2005 Fairchild Semiconductor Corporation FDP8880 / FDB8880 Rev. A 5 www.fairchildsemicom FDP8880 / FDB8880 Typical Characteristics TC = 25C unless otherwise noted 1.5 NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = VDS, ID = 250A 1.1 ID = 250A NORMALIZED GATE THRESHOLD VOLTAGE 1.2 0.9 1.0 0.6 0.3 -80 -40 0 40 80 120 160 200 0.9 -80 -40 0 40 80 120 160 200 TJ, JUNCTION TEMPERATURE (oC) TJ , JUNCTION TEMPERATURE (oC) Figure 11. Normalized Gate Threshold Voltage vs Junction Temperature 2000 Figure 12. Normalized Drain to Source Breakdown Voltage vs Junction Temperature 10 VGS , GATE TO SOURCE VOLTAGE (V) VDD = 15V 8 1000 C, CAPACITANCE (pF) CISS = CGS + C GD COSS CDS + CGD C RSS = CGD 6 4 WAVEFORMS IN DESCENDING ORDER: ID = 54A ID = 5A 0 5 10 15 Qg , GATE CHARGE (nC) 20 25 2 VGS = 0V, f = 1MHz 100 0.1 1 10 VDS , DRAIN TO SOURCE VOLTAGE (V) 30 0 Figure 13. Capacitance vs Drain to Source Voltage Figure 14. Gate Charge Waveforms for Constant Gate Current (c)2005 Fairchild Semiconductor Corporation FDP8880 / FDB8880 Rev. A 6 www.fairchildsemicom FDP8880 / FDB8880 Test Circuits and Waveforms VDS BVDSS L VARY tP TO OBTAIN REQUIRED PEAK IAS VGS DUT tP 0V RG IAS VDD VDD tP VDS + IAS 0.01 0 tAV Figure 15. Unclamped Energy Test Circuit Figure 16. Unclamped Energy Waveforms VDS VDD L VGS Qg(TOT) VDS VGS VGS = 10V + Qg(5) VDD Qgs2 VGS = 5V DUT Ig(REF) VGS = 1V 0 Qg(TH) Qgs Ig(REF) 0 Qgd Figure 17. Gate Charge Test Circuit Figure 18. Gate Charge Waveforms VDS tON td(ON) RL VDS + tOFF td(OFF) tr tf 90% 90% VGS VDD DUT 0 10% 10% RGS VGS VGS 0 10% 50% PULSE WIDTH 90% 50% Figure 19. Switching Time Test Circuit Figure 20. Switching Time Waveforms (c)2005 Fairchild Semiconductor Corporation FDP8880 / FDB8880 Rev. A 7 www.fairchildsemicom FDP8880 / FDB8880 PSPICE Electrical Model .SUBCKT FDP8880 2 1 3 ; rev October 2004 Ca 12 8 9.5e-10 Cb 15 14 9.5e-10 Cin 6 8 1.15e-9 Dbody 7 5 DbodyMOD Dbreak 5 11 DbreakMOD Dplcap 10 5 DplcapMOD Ebreak 11 7 17 18 32.88 Eds 14 8 5 8 1 Egs 13 8 6 8 1 Esg 6 10 6 8 1 Evthres 6 21 19 8 1 Evtemp 20 6 18 22 1 It 8 17 1 Lgate 1 9 5.3e-9 Ldrain 2 5 1.0e-9 Lsource 3 7 1.7e-9 RLgate 1 9 53 RLdrain 2 5 10 RLsource 3 7 17 Mmed 16 6 8 8 MmedMOD Mstro 16 6 8 8 MstroMOD Mweak 16 21 8 8 MweakMOD Rbreak 17 18 RbreakMOD 1 Rdrain 50 16 RdrainMOD 1.0e-3 Rgate 9 20 2.2 RSLC1 5 51 RSLCMOD 1e-6 RSLC2 5 50 1e3 Rsource 8 7 RsourceMOD 6.8e-3 Rvthres 22 8 RvthresMOD 1 Rvtemp 18 19 RvtempMOD 1 S1a 6 12 13 8 S1AMOD S1b 13 12 13 8 S1BMOD S2a 6 15 14 13 S2AMOD S2b 13 15 14 13 S2BMOD Vbat 22 19 DC 1 ESLC 51 50 VALUE={(V(5,51)/ABS(V(5,51)))*(PWR(V(5,51)/(1e-6*170),5))} .MODEL DbodyMOD D (IS=3E-12 IKF=10 N=1.01 RS=5e-3 TRS1=8e-4 TRS2=2e-7 + CJO=4.8e-10 M=0.55 TT=1e-11 XTI=2) .MODEL DbreakMOD D (RS=0.2 TRS1=1e-3 TRS2=-8.8e-6) .MODEL DplcapMOD D (CJO=5.5e-10 IS=1e-30 N=10 M=0.45) .MODEL MstroMOD NMOS (VTO=2.10 KP=170 IS=1e-30 N=10 TOX=1 L=1u W=1u) .MODEL MmedMOD NMOS (VTO=1.75 KP=10 IS=1e-30 N=10 TOX=1 L=1u W=1u RG=2.2) .MODEL MweakMOD NMOS (VTO=1.39 KP=0.05 IS=1e-30 N=10 TOX=1 L=1u W=1u RG=22 RS=0.1) .MODEL RbreakMOD RES (TC1=8.0e-4 TC2=-8e-7) .MODEL RdrainMOD RES (TC1=-12e-3 TC2=.35e-4) .MODEL RSLCMOD RES (TC1=9e-4 TC2=1e-6) .MODEL RsourceMOD RES (TC1=5e-3 TC2=1e-6) .MODEL RvtempMOD RES (TC1=-2.78e-3 TC2=1.5e-6) .MODEL RvthresMOD RES (TC1=-1e-3 TC2=-8.2e-6) MODEL S1AMOD VSWITCH (RON=1e-5 ROFF=0.1 VON=-4 VOFF=-3.5) .MODEL S1BMOD VSWITCH (RON=1e-5 ROFF=0.1 VON=-3.5 VOFF=-4) .MODEL S2AMOD VSWITCH (RON=1e-5 ROFF=0.1 VON=-1.3 VOFF=-0.8) .MODEL S2BMOD VSWITCH (RON=1e-5 ROFF=0.1 VON=-0.8 VOFF=-1.3) .ENDS Note: For further discussion of the PSPICE model, consult A New PSPICE Sub-Circuit for the Power MOSFET Featuring Global Temperature Options; IEEE Power Electronics Specialist Conference Records, 1991, written by William J. Hepp and C. Frank Wheatley. CA S1A 12 13 8 S1B 13 + EGS 6 8 EDS S2A 14 13 S2B CB + 5 8 8 RVTHRES 14 IT 15 17 GATE 1 RLGATE CIN 10 RSLC1 51 ESLC 50 RDRAIN EVTHRES + 19 8 6 MSTRO LSOURCE 8 RSOURCE RLSOURCE RBREAK 18 RVTEMP 19 VBAT + 22 7 SOURCE 3 21 16 RLDRAIN DBREAK 11 + 17 EBREAK 18 MWEAK MMED LDRAIN DPLCAP 5 DRAIN 2 RSLC2 5 51 ESG + LGATE EVTEMP RGATE + 18 22 9 20 6 8 - (c)2005 Fairchild Semiconductor Corporation FDP8880 / FDB8880 Rev. A 8 + DBODY www.fairchildsemicom FDP8880 / FDB8880 SABER Electrical Model rev October 2004 template FDP8880 n2,n1,n3 electrical n2,n1,n3 { var i iscl dp..model dbodymod = (isl=3e-12,ikf=10,nl=1.01,rs=5e-3,trs1=8e-4,trs2=2e-7,cjo=4.8e-10,m=0.55,tt=1e-11,xti=2) dp..model dbreakmod = (rs=0.2,trs1=1e-3,trs2=-8.8e-6) dp..model dplcapmod = (cjo=5.5e-10,isl=10e-30,nl=10,m=0.45) m..model mstrongmod = (type=_n,vto=2.10,kp=170,is=1e-30, tox=1) m..model mmedmod = (type=_n,vto=1.75,kp=10,is=1e-30, tox=1) m..model mweakmod = (type=_n,vto=1.39,kp=0.05,is=1e-30, tox=1,rs=0.1) sw_vcsp..model s1amod = (ron=1e-5,roff=0.1,von=-4,voff=-3.5) LDRAIN sw_vcsp..model s1bmod = (ron=1e-5,roff=0.1,von=-3.5,voff=-4) DPLCAP 5 DRAIN 2 sw_vcsp..model s2amod = (ron=1e-5,roff=0.1,von=-1.3,voff=-0.8) 10 sw_vcsp..model s2bmod = (ron=1e-5,roff=0.1,von=-0.8,voff=-1.3) RLDRAIN RSLC1 c.ca n12 n8 = 9.5e-10 51 c.cb n15 n14 = 9.5e-10 RSLC2 c.cin n6 n8 = 1.15e-9 ISCL dp.dbody n7 n5 = model=dbodymod dp.dbreak n5 n11 = model=dbreakmod dp.dplcap n10 n5 = model=dplcapmod spe.ebreak n11 n7 n17 n18 = 32.88 spe.eds n14 n8 n5 n8 = 1 GATE spe.egs n13 n8 n6 n8 = 1 1 spe.esg n6 n10 n6 n8 = 1 spe.evthres n6 n21 n19 n8 = 1 spe.evtemp n20 n6 n18 n22 = 1 i.it n8 n17 = 1 l.lgate n1 n9 = 5.3e-9 l.ldrain n2 n5 = 1.0e-9 l.lsource n3 n7 = 1.7e-9 res.rlgate n1 n9 = 53 res.rldrain n2 n5 = 10 res.rlsource n3 n7 = 17 CA LGATE ESG + EVTEMP RGATE + 18 22 9 20 6 6 8 EVTHRES + 19 8 50 RDRAIN 21 16 DBREAK 11 DBODY MWEAK MMED EBREAK + 17 18 - RLGATE CIN MSTRO 8 LSOURCE 7 RLSOURCE SOURCE 3 RSOURCE S1A 12 S1B 13 + EGS 6 8 EDS 13 8 S2A 14 13 S2B CB + 5 8 8 RVTHRES 14 IT VBAT + 22 15 17 RBREAK 18 RVTEMP 19 m.mmed n16 n6 n8 n8 = model=mmedmod, l=1u, w=1u m.mstrong n16 n6 n8 n8 = model=mstrongmod, l=1u, w=1u m.mweak n16 n21 n8 n8 = model=mweakmod, l=1u, w=1u res.rbreak n17 n18 = 1, tc1=8.0e-4,tc2=-8e-7 res.rdrain n50 n16 = 1.0e-3, tc1=-12e-3,tc2=.35e-4 res.rgate n9 n20 = 2.2 res.rslc1 n5 n51 = 1e-6, tc1=9e-4,tc2=1e-6 res.rslc2 n5 n50 = 1e3 res.rsource n8 n7 = 6.8e-3, tc1=5e-3,tc2=1e-6 res.rvthres n22 n8 = 1, tc1=-1e-3,tc2=-8.2e-6 res.rvtemp n18 n19 = 1, tc1=-2.78e-3,tc2=1.5e-6 sw_vcsp.s1a n6 n12 n13 n8 = model=s1amod sw_vcsp.s1b n13 n12 n13 n8 = model=s1bmod sw_vcsp.s2a n6 n15 n14 n13 = model=s2amod sw_vcsp.s2b n13 n15 n14 n13 = model=s2bmod v.vbat n22 n19 = dc=1 equations { i (n51->n50) +=iscl iscl: v(n51,n50) = ((v(n5,n51)/(1e-9+abs(v(n5,n51))))*((abs(v(n5,n51)*1e6/170))** 5))} } (c)2005 Fairchild Semiconductor Corporation FDP8880 / FDB8880 Rev. A 9 www.fairchildsemicom FDP8880 / FDB8880 PSPICE Thermal Model REV 23 December 2003 FDP8880T CTHERM1 TH 6 8e-4 CTHERM2 6 5 1e-3 CTHERM3 5 4 2.5e-3 CTHERM4 4 3 2.6e-3 CTHERM5 3 2 8e-3 CTHERM6 2 TL 1.5e-2 RTHERM1 TH 6 1.44e-1 RTHERM2 6 5 1.9e-1 RTHERM3 5 4 3.0e-1 RTHERM4 4 3 4.0e-1 RTHERM5 3 2 5.7e-1 RTHERM6 2 TL 5.8e-1 th JUNCTION RTHERM1 CTHERM1 6 RTHERM2 CTHERM2 5 SABER Thermal Model SABER thermal model FDP8880T template thermal_model th tl thermal_c th, tl { ctherm.ctherm1 th 6 =8e-4 ctherm.ctherm2 6 5 =1e-3 ctherm.ctherm3 5 4 =2.5e-3 ctherm.ctherm4 4 3 =2.6e-3 ctherm.ctherm5 3 2 =8e-3 ctherm.ctherm6 2 tl =1.5e-2 rtherm.rtherm1 th 6 =1.44e-1 rtherm.rtherm2 6 5 =1.9e-1 rtherm.rtherm3 5 4 =3.0e-1 rtherm.rtherm4 4 3 =4.0e-1 rtherm.rtherm5 3 2 =5.7e-1 rtherm.rtherm6 2 tl =5.8e-1 } RTHERM3 CTHERM3 4 RTHERM4 CTHERM4 3 RTHERM5 CTHERM5 2 RTHERM6 CTHERM6 tl CASE (c)2005 Fairchild Semiconductor Corporation FDP8880 / FDB8880 Rev. A 10 www.fairchildsemicom FDP8880 / FDB8880 N-Channel PowerTrench(R) MOSFET TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM ActiveArrayTM BottomlessTM CoolFETTM CROSSVOLTTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST(R) FASTrTM FPSTM FRFETTM GlobalOptoisolatorTM GTOTM HiSeCTM I2CTM i-LoTM Across the board. Around the world.TM The Power Franchise(R) Programmable Active DroopTM ImpliedDisconnectTM IntelliMAXTM ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC(R) OPTOPLANARTM PACMANTM POPTM Power247TM PowerEdgeTM PowerSaverTM PowerTrench(R) QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM SILENT SWITCHER(R) SMART STARTTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogic(R) TINYOPTOTM TruTranslationTM UHCTM UltraFET (R) UniFETTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Preliminary No Identification Needed Full Production Obsolete Not In Production 11 FDP8880 / FDB8880 Rev. A www.fairchildsemi.com |
Price & Availability of FDB8880
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |